Friday, July 23, 2010

Rote Learning

One of the reasons for introducing the contrast between Intuitive Declarative and Blind Procedural learning was to deal with the concept of rote learning. In particular, rote learning can be considered a primary form of procedural learning.

What is rote learning?
All users of SuperMemo know the importance of repetition in learning. However, there are two distinctly different functions for which repetition can be used. On the one hand, rote learning involves the acquisition of knowledge through repetition. Conversely, SuperMemo uses repetition as a maintenance tool for previously-acquired knowledge.

Examples of rote learning:
  • In school, most children learned their multiplication tables through an endless (and mindless) process of re-reading and recital. Despite any work done to reconcile multiplication with arithmetic (i.e. that 3x = x + x + x) it was primarily this mundane repetition that bored the numbers into their heads
  • Every budding musician's first few years consist at least partly of practicing scales, arpeggios, etudes and other such exercises - over and over (and over) - until the fingers know how to play them, and the mind doesn't need to get in the way
Whatever your skill is, training for it will generally involve practicing it over and over until the slow but inexorable process of trial and error can chisel the neural script for it into your brain. As you will notice from all of these cases and any others that you may have in your experience, such rote learning does not culminate in any great amount of understanding. To the extent that any understanding is gained at all, it is only that amount that is required directly during execution of the skill.

This method of learning is focused entirely on practical application. As long as you can defend yourself in a fight, it is not required that you explain the theory behind your technique. As long as you can play your piece in the orchestra, in tune and in time, it's not necessary that you be able to name and describe all the muscles involved in playing. This type of learning is does not require strong understanding.

In contrast to this process, repetitions in SuperMemo occur only after skill or knowledge has been acquired. In the case that you have thoroughly studied something such that you can fully understand and apply it, SuperMemo simply ensures that you "lock in" this improvement so that you need never return to your notes and wonder what on Earth they mean (which otherwise happens very often to students studying large amounts of material). Spaced repetition does not increase your understanding, nor does it reduce it - it simply maintains it at whatever level you have achieved by the time you formulate your items.

The somewhat subtle difference between these two forms of repetition is the first point of misunderstanding with potential new users of SuperMemo. The assumption is that "repetition = rote learning". In fact there are two types of repetition, each with different functions. In particular, rote learning is the acquisition of skill through repetition.


How it Works
The basic principle which makes rote learning effective for acquiring a skill is the variation principle. This is the fundamental principle that a new skill is easiest to learn when it is but a slight variation on an already-learned skill. In rote learning, the first time you try to execute something, you only get part of it right. However, you then repeat the part that you know, and then try adding a bit more to it.

For example, you try to play the first line of a musical piece but only get the first two bars sounding good. So what do you do? You practice the 3rd bar in isolation, and then try to add it on the the first two bars. Then you learn the fourth bar, and so on. Overall, it looks something like:
  1. Play the first bar ok
  2. Play the first bar again, and also play the second bar
  3. Play the first and second bar again, this time getting the dynamics right in the second
  4. and so on
This is of course the simplest situation - no new techniques to be learned, no difficult passages, just learning of notes. However, it illustrates the basic rationale, which is that each time you repeat the skill you add on a little bit extra.

When you first feel the thrill of riding a bike, it is all you can do to keep in a straight line. However, after a few more goes you can also steer and brake without smashing into things or jumping off the bike.

When you learn your multiplication tables, it often happens that you can remember the first 2 or 3, but have trouble with the rest. e.g.
  • 1 x 3 = 3
  • 2 x 3 = 6
  • 3 x 3 = 9
  • 4 x 3 = ...?
However, after some time of saying the whole x3 table from 1 x 3 to 12 x 3 over and over (and over) again, you add on a few more lines each time. The parts you learn may not necessarily be in order. So, you might learn 10 x 3 before you learn 7 x 3. However, you are still using repetition and the variation principle to add on, bit by bit, to the basic skill that you started with.

Now, it is of interest to note that in mathematics education "Children have a tendency to learn algorithms by rote without developing any understanding of what they are doing" (Hiebert, 1986). This statement beautifully illustrates that skills can be acquired through simple rote repetition, without any supporting understanding. Now, this quote is obviously pointing to the negative effects of learning maths without declarative support. However, the cure is not to stop children learning procedures by rote - the method is obviously effective - it is simply to make sure to also teach the context and rationale of those procedures. Apart from being able to apply these, students should also be able to choose when to apply them, and understand why they work.


Terminology and other Meaningless Verbal Knowledge
The last part of this post may turn out to be the strangest. And that is because I propose that any knowledge acquired through repetition alone (i.e. rote), without association to other concepts (which is the primary indicator of understanding), is procedural. As a simple test, if there is something that you cannot remember on the first attempt, but need several goes in the Final Drill to learn it, it is probably procedural.

A particularly large and relevant example of this type of knowledge (especially in SuperMemo) is terminology and other general vocabulary. Knowledge of which word is used to represent which idea is almost always learned through repetition, rather than through an intuitive understanding that the word makes sense. For example, you learn that "orange" is the word for that large fruit with the unique colour to its skin.












Why is this fruit called an "orange", and not a "coconut"? It just is and you better practice the word a few times or you will forget what it means the next time someone says it. Certainly, you can learn the etymology of the word and understand (declaratively) where it was originally derived from, but you don't have time to do this with every new word. And let's face it, how many children know or care about the etymology of words like "mum" and "dad"? That's just what they're called, and with a bit of effort, they're not too hard to say.
  • This continent is "Africa". Why?
  • This person is called "John". Why?
  • This mathematical symbol is called "pi". Why?
  • This bone is called the "tibia'. Why?
As you can see, asking "why?" to any of these is irrelevant in most situations. Even if you did find out why, you would still have to learn the word, separately.

The only real exception is words where the etymology of words is obvious. Because I am part Greek, and have lived several years in Greece, there are many scientific words that I can understand immediately. For example, I knew the meaning of the word "polychromatic" the very first time I heard it, because it is made of the Greek words "poly" (many) and "chromatic" (colours). So something that is polychromatic has "many colours". In this case, I learned this word declaratively. Unfortunately there are not so many other cases where this can be done. Even compound words like "pancake", which ostensibly comes from "pan" and "cake", don't really make that much sense, since a pancake is not really a cake anyway.

(http://www.wired.com/medtech/health/magazine/16-05/ff_wozniak?currentPage=all)
This Wired article on SuperMemo and Wozniak describes how Ebbinghaus experimented with nonsense syllables such as "bes, dek, fel, gup, huf, ke4k, be4p, bCn, hes". Though many psychologists would probably treat these as declarative, I contend that they are probably not. At least in practice, they can be treated as procedural, and that is what's important for us. However, I would also hazard a guess that an fMRI would confirm that this type of knowledge is not processed in the brain in the same way as when you think about something that you understand, and has many associations to other knowledge. The intuitive justification is that when learning vocabulary, you are simply acquiring the ability to say the right word when presented with certain information.

Thus, the names of countries, capital cities, parts of anatomy, and any other technical jargon all form procedural knowledge. In fact, practically all words in language are learned procedurally, except perhaps those words that can be readily and obviously derived from other words.

Redundancy
Redundancy is an important and useful tool for maximising the stability of your memories through association. When I separated the ideas of Intuitive Declarative and Blind Procedural, I did not mean that you should only learn one or the other. In practice you must learn both, in order to reinforce the same knowledge from different perspectives. It is important that you learn these as two different representations of the same knowledge, rather than learn a single all-encompassing "intuitive procedural", so to speak. As I said in response to a comment on another post, you should keep the training of skills and learning of knowledge separate. It's just like saying that in language learning, vocabulary, grammar, spelling, punctuation etc should all be formulated into separate SuperMemo elements - not because one is more important than the other, or because they are unrelated, but because it allows for better focus and more efficient learning.

Thus, you will naturally find instances of procedural learning that seem to require a lot more thought than others, even once they have been mastered. The trick is to artificially separate out the different components so that they can be learned separately and then used to support each other.


In summary, rote learning is when you acquire knowledge primarily through repetition rather than through association to other knowledge. If you learn something by rote, you should thereafter treat that knowledge as procedural. Also, all knowledge is inherently fluid and often contains parts that require blind execution and parts that require intuitive understanding. Learn both, and use them to support each other.

Monday, July 5, 2010

Smart Skills: Example (Drawing)

This post is in response to a comment that requested an arts-based example. As I explained in answer to the comment, there isn't really much difference in the method of application - just in the material that is being learned. Nevertheless, as it is generally helpful to see more than one example of a concept in application, I will give the example here.

=============================================

Suppose you want to learn how to draw in perspective. A good place to start seems to be the following website: http://www.technologystudent.com/designpro/drawdex.htm

From there, say you want to learn how to draw with single-point perspective. Click on "1. Single Point Perspective".

Context: (As it says on the page) "Perspective drawing is a good style to use when drawing in 3D". Single point perspective is the most basic technique. However, using the same skills, more complex drawings can be made. A cube is probably the most fundamental 3D object, and is the one which this exercise is based on. Some SuperMemo items might look like:

Q: What basic style is generally used for making objects look 3D?
A: Perspective drawing

Q: What is the simplest type of perspective drawing?
A: single point perspective

Q: What is the simplest 3D object to draw?
A: a cube (i.e. 1 line for each dimension, all of equal length)


Procedure: (see http://www.technologystudent.com/designpro/perspec1.htm for a full animation of how to draw a cube in single point perspective. Here is a copied version of the instructions:)

  1. Draw one side of the cube and select a vanishing point (marked with an 'X').












  2. Draw very faint lines from each corner to the vanishing point












  3. Draw horizontal and vertical lines for the 'back of the cube












  4. Go over the faint perspective of the cube so that the lines that make up the cube are dark and sharp.













This can simply be formulated as:

---------------------------------------------
Q: Draw a cube in single point perspective
A:












---------------------------------------------

Rationale: (source: http://en.wikipedia.org/wiki/Perspective_(graphical)#One-point_perspective) The ultimate basis for this type of drawing comes from the fact that the human eye collects conically projected light. Leon Battista Alberti further described defined perspective in terms of planar projections of light, and similar triangles. Overall, the basis lies in physics and mathematics.

Obviously, this part may be of little importance to the practicing artist, which is yet another example of why procedural knowledge can be learned blindly... You don't need to and how or why the method works in order to do it!

Nevertheless, you could formulate these observations as:

Q: What basic mathematical concept did Alberti use to describe the basis of perspective?
A: Similar triangles

Q: Does the human eye collect planar-projected light?
A: No (it is conically projected)

=============================================

There are many other, more advanced exercises on this website, and it is worth learning and formulating them in the same way, if you want to practice your drawing skills.

However, I hope that, by comparison with the maths example, you can see that the method doesn't differ all that much, regardless of the material.

Finally, it is not worth reading this blog unless you are going to try applying these methods. After all, you are presumably here because you want to gain the skills required to learn procedural knowledge in SuperMemo, not because you want to theorise on how it should be done, or why it might or might not work. So, start experimenting with your particular material and tell us what you find to be effective.

Friday, July 2, 2010

Smart Skills: Example (Maths)

This post continues on from the last one, and presents a practical example of how to integrate declarative and procedural components when learning a skill from scratch.

=====================================

Suppose you are in school, and have to learn the mathematical method for finding the volume of a cylinder.

Context: The ability to find the volume of a cylinder would allow you to determine the capacity of many different types of containers (e.g. cup, water bottle, rainwater tank). Furthermore, because you have already learned how to find the volume of a cube and a rectangular prism in the last lesson, this will extend your general ability to work with real world objects. Note: “Because your teacher wants you to”, is not a context! Neither is, “because it’s the next lesson of the chapter/book”.

Some exemplary SuperMemo items for reinforcing the context may look like this:

----------------------------------------------------

Q: In order to find out how much water these objects can hold you must be able to find the volume of a [...]

A: cylinder

----------------------------------------------------

Q: In order to find out how much water these objects can hold you must be able to find the [...] of a cylinder

A: volume

----------------------------------------------------

Procedure:
The example in the book says:

There is a rainwater tank of height 3m and diameter 4m. What is its volume?

  1. The general formula for finding the volume of an object with a uniform cross-section is: volume = (area of base) x (height)

  2. The base is a circle, so:

    (area of base) = πr2

    --> (area of base) = π*(4/2)2

    --> (area of base) = 12.6m2

  3. volume = (area of base) x (height)

    --> volume = 12.6 x 3

    --> volume = 37.8m3

After you read through this, cover it up and re-write the 3 steps on a sheet of paper. Once you get the answer, check it against the example. If you get it correct, great! If not, check which step you missed and try again.

The SuperMemo item can simply be:

Q: A cylindrical rainwater tank is 3m tall and 4m wide. What is its volume?

A: 37.8m3 (pg440)

Answer this item by writing out the entire solution. The page reference is there in case you forget the procedure and need to re-learn the procedure. Alternatively, you can simply write the entire solution in the answer section of your SuperMemo item. Although there’s more clutter that way, you can get rid of your books, which is a big plus.

If you consistently have trouble with the second step, you can formulate it as a separate item. For example:

Q: A circle has radius 2m, what is its area?

A: 12.6m2

However, this does not mean that you should learn the primary procedure as a group of smaller ones. Instead, you should learn both the primary procedure (i.e. volume of a cylinder) and the secondary one (i.e. area of a circle) as separate items. This increases redundancy and makes it less likely that you will ever have to go back to the book, even if you must relearn the primary procedure.

Rationale:

Step 1 is not much more than a definition. It can be formulated as follows:

----------------------------------------------------

Q: How can the volume of this shape be calculated? Hint: it has a uniform cross-section








A: (volume) = (area of base) x (height)

----------------------------------------------------

Since the height is already known, step 2 simply involves determining the area of the base of the cylinder. Hence:

Q: What shape is the base of a cylinder?

A: a circle

Q: If a circle has radius r, what is its area?

A: πr2

Q: If a circle has diameter D, what is its radius r?

A: r = D/2

The last step simply involves substitution of the height and area into the initial formula. If you wish, you could formulate this as:

Q: Given a cylinder with a base area of 12.6m2 and a height of 3m, what should you do to find the volume?

A: multiply them

=====================================

Hopefully you were able to get through this example and get a feeling for the way procedural knowledge can be acquired, formulated and reviewed blindly and independently, and yet intimately combined with a declarative overview.

Please leave any comments below.